No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show quorum_server_link general

show quorum_server_link general


The show quorum_server_link general command is used to query the links between the disk array and quorum servers.


show quorum_server_link general [ server_id=? ]






ID of the quorum server.

Run the "show quorum_server general" command to obtain the value.



Usage Guidelines



  • Query the links between the disk array and all quorum servers.
    admin:/>show quorum_server_link general                                                             
      Link ID  Link Status  Local Controller  Local Port Server Id 
      -------  -----------  ----------------  -----------  --------- 
      0        Link Up      0A                CTE0.A.MGMT  0           
      65792 Link Up      0B                CTE0.B.MGMT  1          
  • Query the link between the disk array and quorum server "1".
    admin:/>show quorum_server_link general server_id=1 
      Link ID  Link Status  Local Controller  Local Port Server Id 
      -------  -----------  ----------------  -----------  --------- 
      65536    Link Up      0A                CTE0.A.MGMT  1           
      65792 Link Up      0B                CTE0.B.MGMT  1 

System Response

The following table describes the parameter meanings.



Link ID

Link ID.

Link Status

Link status.

Local Controller

ID of the local controller.

Local Port

Local port.

Server Id

ID of the quorum server.

Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 121724

Downloads: 149

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next