No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change snapshot_consistency_group restore

change snapshot_consistency_group restore


The change snapshot_consistency_group restore command is used to start rollback from a snapshot consistency group.


change snapshot_consistency_group restore snapshot_consistency_group_id=? [ restore_speed=? ]






ID of a snapshot consistency group.

The value is an integer ranging from 1 to 4096.


Rollback speed of a snapshot consistency group.




Usage Guidelines



Start rollback from snapshot consistency group "1".

admin:/>change snapshot_consistency_group restore snapshot_consistency_group_id=1 
WARNING: You are about to roll back the snapshot consistency group. This operation uses the snapshot data in the snapshot consistency group to overwrite the data in the LUN consistency group. This operation may cause heavy service load and decrease the read/write performance of the host. Before performing this operation, ensure that the LUNs in the LUN consistency group are not read or written by the host, no data is stored in the host cache, and the snapshots in the snapshot consistency group are not written by the host.  
1. Before performing this operation, back up the LUN consistency group data.  
2. Ensure that the free capacity of the storage pool is greater than the actual capacity of the LUN in the LUN consistency group.  
3. Select the medium speed. If you select the high or highest speed, perform this operation during off-peak hours. 
Have you read danger alert message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response


Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 124452

Downloads: 155

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next