No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show snmp usm

show snmp usm

Function

The show snmp usm command is used to query the configuration of USM user.

Format

show snmp usm [ user_name=? ]

Parameters

Parameter

Description

Value

user_name=?

USM user name. If this parameter is specified, USM information on the specified user is queried.

To obtain the value, run "show snmp usm" without parameters.

Level

Guest

Usage Guidelines

  • To query configurations of all USM users, run "show snmp usm".
  • To query configurations of a specific USM user, run show "snmp usm user_name=?".

Example

Query configurations of all USM users.

admin:/>show snmp usm 
  User Name Is Default Authenticate Protocol Private Protocol User Level 
  --------- ---------- --------------------- ---------------- -----------  
  User      No         MD5                   AES              Read Write 
  User2     No         MD5                   3DES             Read Write

System Response

The following table describes the parameter meanings.

Parameter

Meaning

User Name

USM user name.

Is Default

Whether the user name is the default USM user name.

Authenticate Protocol

User authentication protocol.

Private Protocol

User private protocol.

User Level

User level.

Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100049140

Views: 103210

Downloads: 119

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next