No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show hyper_metro_consistency_group general

show hyper_metro_consistency_group general


The show hyper_metro_consistency_group general command is used to query a HyperMetro consistency group.


show hyper_metro_consistency_group general [ consistency_group_id=? ]






ID of the HyperMetro consistency group.

Run the "show hyper_metro_consistency_group general" command without parameters to obtain the value.



Usage Guidelines



  • To query the HyperMetro consistency group 1, run the following command.
    admin:/>show hyper_metro_consistency_group general consistency_id=1 
    ID : 1 
    Name: cg001 
    Health Status : Normal 
    Running Status : Normal 
    Sync Rate : Middle 
    Role : Preferred 
    Recovery Policy : automatic 
    Domain Id : 1 
    Domain name : HCD001 
    Description : cg 
    Sync Direction : Local to Remote 
    Isolation Switch        : Close                  
    Isolation Threshold(ms) : 1000 
    Lock Mode  : Optimistic Mode 
    Write Secondary Timeout(s) : 30
  • To query all HyperMetro consistency groups in the device, run the following command.
    admin:/>show hyper_metro_consistency_group general 
    ID Name Health Status Running Status Sync Rate Role Sync Direction 
    -- ---- ------------- -------------- ---------  --------  -------------- 
    1 cg001     Normal       Normal         Middle  Preferred  Local to Remote 
    1 cg001     Normal       Normal         Middle  Preferred  Local to Remote

System Response

The following table describes the parameter meanings.




ID of the consistency group.


Name of the consistency group.

Health Status

Health status the consistency group: Normal or Fault.

Running Status

Running status of the consistency group.

Sync Rate

Synchronization rate: High, Middle, Low or Highest.


Whether the end is Preferred end or Non-preferred end.

Recovery Policy

Recovery policy.

Domain Id

Domain ID.

Domain Name

Domain name.


Description of the HyperMetro consistency group.

Sync Direction

Synchronization direction: Local to Remote or Remote to Local.

Isolation Switch

Isolation switch: open or close.

Isolation Threshold(ms)

Isolation threshold.

Lock Mode

The lock mode of hypermetro pair: Optimistic Mode or Pessimistic Mode.

Write Secondary Timeout

Timeout period of I/O writing the secondary end (unit: second).

Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 121752

Downloads: 151

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next