No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
remove snapshot_schedule lun

remove snapshot_schedule lun

Function

The remove snapshot_schedule lun command is used to delete LUNs from a timing snapshot schedule.

Format

remove snapshot_schedule lun schedule_id=? lun_id_list=?

Parameters

Parameter

Description

Value

schedule_id=?

Timing snapshot schedule ID.

To obtain the value, run "show snapshot_schedule general".

lun_id_list=?

ID list of the LUNs to be removed.

  • To obtain the value, run "show lun general".
  • You can specify multiple LUN IDs separated by commas (,) or an ID range separated by hyphens (-), such as: 0,5-8.

A maximum of 128 IDs can be entered.

Level

Administrator

Usage Guidelines

  • Before performing the operation, confirm that the schedule ID is correct and exits.
  • Before performing the operation, confirm that the LUN ID is correct and exits.

Example

Remove LUN "2" from timing snapshot schedule "2".

admin:/>remove snapshot_schedule lun schedule_id=2 lun_id_list=2 
Warning: You are about to remove the LUN from the timing snapshot schedule. The removal is irreversible. This operation will delete the relationship between the LUN and the timing snapshot schedule from the system. 
Suggestion: Before performing this operation, ensure that you have selected the correct LUN you want to remove. 
Have you read warning message carefully?(y/n)y 

Are you sure you really want to perform the operation?(y/n)y 
Remove snapshot_schedule lun 2 successfully.

System Response

None

Translation
Download
Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 115287

Downloads: 134

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next