No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show remote_lun path

show remote_lun path

Function

The show remote_lun path command is used to query the information about the paths on a remote LUN.

Format

show remote_lun path [ path_id=? ] [ remote_lun_wwn=? ]

Parameters

Parameter

Description

Value

path_id=?

Path ID on a remote LUN.

Run the "show remote_lun path remote_lun_wwn=?" command to obtain the value.

remote_lun_wwn=?

WWN of a remote LUN.

Run the "show remote_lun general" command to obtain the value.

Level

Guest

Usage Guidelines

The following parameters or parameter sets are mutually exclusive: "path_id" and "remote_lun_wwn".

Example

  • Query the information about a path on a remote LUN whose WWN is "60:02:2a:11:00:0b:5a:26:06:37:28:12:00:00:00:0b". The command output varies depending on a specific product.
    admin:/>show remote_lun path remote_lun_wwn=60:02:2a:11:00:0b:5a:26:06:37:28:12:00:00:00:0b 
      
    Path ID Path Type Local Controller Local Port ID Remote IP Remote WWN Remote Port WWPN Host LUN ID Path Priority 
    ------- --------- ---------------- ------------- --------- ---------- ---------------- ----------- ------------- 
    11 FC Link 0A ENG0.A1.H0 -- -- 200a0022a10b5a26 11 Active 
    12 FC Link 0A ENG0.A1.H2 -- -- 201a0022a10b5a26 11 Active 
    15 FC Link 0B ENG0.B1.H2 -- -- 201b0022a10b5a26 11 Active 
    17 FC Link 0B ENG0.B1.H0 -- -- 200b0022a10b5a26 11 Active
  • Query the information about a path on a remote LUN whose path ID is "11". The command output varies depending on a specific product.
    admin:/>show remote_lun path path_id=11 
      
    Path ID : 11 
    Path Type : FC Link 
    Local Controller : 0A 
    Local Port ID : ENG0.A1.H0 
    Target Name : -- 
    Initiator Name : -- 
    Remote IP : -- 
    Local IP : -- 
    Remote WWN : -- 
    Local Port WWPN : 20080022a103b480 
    Remote Port WWPN : 200a0022a10b5a26 
    Host LUN ID : 11 
    Path Priority : Active 
    Local ISID : -- 
    Remote TGPT : --

System Response

Parameter

Meaning

Path ID

Path ID.

Path Type

Path type: FC or iSCSI.

Local Controller

ID of the local controller.

Local Port ID

ID of the local port.

Target Name

iSCSI target name.

Initiator Name

iSCSI initiator name.

Remote IP

IP address of the remote device.

Local IP

IP address of the local device.

Remote WWN

WWN of the remote device.

Local Port WWPN

WWPN of the local port.

Remote Port WWPN

WWPN of the remote port.

Host LUN ID

Host LUN ID.

Path Priority

Path priority.

Local ISID

iSCSI initiator session identifier of the local device.

Remote TGPT

iSCSI target portal group tag of the remote device.

Translation
Download
Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 122351

Downloads: 151

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next