No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete bond_port

delete bond_port

Function

The delete bond_port command is used to delete an Ethernet bond port.

Format

delete bond_port { bond_port_id=? | bond_port_name=? }

Parameters

Parameter

Description

Value

bond_port_id=?

Bond port ID.

To obtain the value, run the "show bond_port" command.

bond_port_name=?

Bond port name.

To obtain the value, run the "show bond_port" command.

Level

Administrator

Usage Guidelines

Before running this command, stop services carried by the Ethernet bond port you want to delete.

Example

  • Delete the Ethernet bond port whose ID is "0".
    admin:/>delete bond_port bond_port_id=0 
    DANGER: You are about to unbind ethernet ports. This operation interrupts all connections of the preceding ethernet ports. 
    Suggestion: Before performing this operation, stop all services on the preceding ethernet ports. 
    Have you read danger alert message carefully?(y/n)y 
    Are you sure you really want to perform the operation?(y/n) 
    Command executed successfully.
  • Delete Ethernet bond port "bond_1_1".
    admin:/>delete bond_port bond_port_name=bond_1_1 
    DANGER: You are about to unbind ethernet ports. This operation interrupts all connections of the preceding ethernet ports. 
    Suggestion: Before performing this operation, stop all services on the preceding ethernet ports. 
    Have you read danger alert message carefully?(y/n)y 
    Are you sure you really want to perform the operation?(y/n) 
    Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 123909

Downloads: 155

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next