No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show port bit_error

show port bit_error

Function

The show port bit_error command is used to show the bit_error of the port.

Format

show port bit_error [ physical_type=? ] [ port_id=? ]

Parameters

Parameter

Description

Value

port_id=?

ID of a port.

To obtain the value, run "show port general" without parameter.

physical_type=?

Physical port type.

The value can be "FC", "ETH", "SAS", "PCIE", where:

  • "FC": indicates Fibre Channel ports.
  • "ETH": indicates Ethernet ports (including iSCSI host ports and management network ports).
  • "SAS": indicates SAS ports.
  • "PCIE": indicates PCIe ports.

Level

Guest

Usage Guidelines

  • To query details on all ports, run "show port bit_error".
  • To query details on a specific port, run "show port bit_error physical_type=? port_id=?".

Example

  • show port bit_error.
    admin:/>show port bit_error 
    ETH port: 
    ID Error Packets Lost Packets Over Flowed Packets Start Time 
    ---------- ------------- ------------ ------------------- ----------------------------- 
    CTE0.A3.P0 0 0 0 2014-09-18/21:46:27 UTC-12:00 
    CTE0.A3.P1 0 0 0 2014-09-18/21:46:27 UTC-12:00 
    CTE0.A3.P2 0 0 0 2014-09-18/21:46:28 UTC-12:00 
    CTE0.A3.P3 0 0 0 2014-09-18/21:46:28 UTC-12:00 
    CTE0.B3.P0 0 0 0 2014-09-18/20:36:54 UTC-12:00 
    CTE0.B3.P1 0 0 0 2014-09-18/20:36:54 UTC-12:00 
    CTE0.B3.P2 0 0 0 2014-09-18/20:36:54 UTC-12:00 
    CTE0.B3.P3 0 0 0 2014-09-18/20:36:54 UTC-12:00 
    FC port: 
    ID Lost Signals Link Errors Codes Lost Synchronizations Failed Connections Start Time BadCrc Errors Codes 
    ---------- ------------ ----------------- --------------------- ------------------ ----------------------------- ------------------ 
    CTE0.A1.P0 0 0 0 0 2014-09-18/20:44:40 UTC-12:00 0                                       
    CTE0.A1.P1 0 0 0 0 2014-09-18/20:44:38 UTC-12:00 0  
    CTE0.B1.P0 0 0 0 0 2014-09-18/20:36:54 UTC-12:00 0  
    CTE0.B1.P1 0 0 0 0 2014-09-18/20:36:54 UTC-12:00 0  
    SAS port: 
    ID Invalid Dword Consist Errors Loss Of DWORD PHY Reset Errors Start Time 
    ------------ ------------- -------------- ------------- ---------------- ----------------------------- 
    CTE0.A0.P0 0 0 0 0 2014-09-18/20:36:58 UTC-12:00 
    CTE0.A0.P1 0 0 0 0 2014-09-18/20:36:59 UTC-12:00 
    CTE0.A0.P2 0 0 0 0 2014-09-18/20:36:59 UTC-12:00 
    CTE0.A0.P3 0 0 0 0 2014-09-18/20:36:59 UTC-12:00 
    DAE000.A.PRI 455 465 15 29 2014-09-18/20:36:59 UTC-12:00 
    DAE000.A.EXP 0 0 0 0 2014-09-18/20:37:00 UTC-12:00 
    CTE0.B0.P0 0 0 0 0 2014-09-18/20:36:51 UTC-12:00 
    CTE0.B0.P1 0 0 0 0 2014-09-18/20:36:51 UTC-12:00 
    CTE0.B0.P2 0 0 0 0 2014-09-18/20:36:51 UTC-12:00 
    CTE0.B0.P3 0 0 0 0 2014-09-18/20:36:51 UTC-12:00 
    DAE000.B.PRI 527 540 15 19 2014-09-18/20:36:51 UTC-12:00 
    DAE000.B.EXP 0 0 0 0 2014-09-18/20:36:52 UTC-12:00
  • To query bit_error on the port whose ID is "ENG0.A.EXP1". The ID varies depending on a specific product.
    admin:/>show port bit_error physical_type=SAS port_id=ENG0.A.EXP1 
    ID : ENG0.A.EXP1 
    Invalid Dword : 0 
    Consist Errors : 0 
    Loss Of DWORD : 0 
    PHY Reset Errors : 0 
    Start Time : 2014-09-15/10:51:06 +08:00
  • Querying bit errors of the PCIE port whose ID is "CTE0.R3.IOM0.P0". The ID varies depending on a specific product.
    admin:/>show port bit_error physical_type=PCIE port_id=CTE0.R3.IOM0.P0 
    ID                   : CTE0.R3.IOM0.P0               
    ECRC Error           : 0                             
    Bad Tlp              : 0                             
    Bad Dllp             : 0                             
    Recv Error           : 0                             
    Chip Ecc Error       : 0                             
    Start Time           : 2017-02-15/14:40:39 UTC+08:00  
    Replay Timer Timeout : 0 
    Rollover             : 0

System Response

The following table describes the parameter meanings.

Parameter

Meaning

ID

Port ID.

Error Packets

Error packets number.

Over Flowed Packets

Over flowed packets number.

Lost Packets

Lost packets number.

Start Time

Start Time.

BadCrc Errors Codes

BadCrc Errors Codes number.

Replay Timer Timeout

Replay timer timeout.

Rollover

Replay num rollover status.

Translation
Download
Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 123788

Downloads: 155

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next