No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show smartqos_policy hierarchical

show smartqos_policy hierarchical


The show smartqos_policy hierarchical command is used to query information about SmartQoS policies in a specified hierarchical SmartQoS policy.


show smartqos_policy hierarchical hierarchical_smartqos_policy_id=?






ID of a hierarchical SmartQoS policy.

To obtain the value, run "show smartqos_policy general".



Usage Guidelines

Run show smartqos_policy hierarchical hierarchical_smartqos_policy_id=? to query SmartQoS policy information of specified hierarchical SmartQoS.


Query information about SmartQoS policies in hierarchical SmartQoS policy "0".

admin:/>show smartqos_policy hierarchical hierarchical_smartqos_policy_id=0 
ID Name Health Status Running Status IO Type Enabled LUN List Filesystem List Ctrl Type 
-- ------- ------------- -------------- ---------- ------- -------- -------  ------- 

0 newqos Normal Inactive Read_write No -- --  Normal 
3 newqos2 Normal Inactive Read_write No 0,1,2 --  Normal 
2 newqos3 Normal Inactive Read_write No 7 --  Normal 
4 newqos4 Normal Inactive Read_write No 6 --  Normal

System Response

The following table describes the parameter meanings.



Ctrl Type

Type of the SmartQoS policy that you want to control.

Filesystem List

ID of file systems that you add to a SmartQoS policy.

LUN List

ID of LUNs that you add to a SmartQoS policy.

Health Status

Health status.

Running Status

Running status.

IO Type

Type of the I/O that you want to control.


State of a SmartQoS policy.


ID of a SmartQoS policy.


Name of a SmartQoS policy.

Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 122495

Downloads: 151

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next