No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
add hyper_cdp_schedule lun_consistency_group

add hyper_cdp_schedule lun_consistency_group


The add hyper_cdp_schedule lun_consistency_group command is used to add LUN consistency groups to a HyperCDP schedule.


add hyper_cdp_schedule lun_consistency_group schedule_id=? lun_consistency_group_id_list=?






HyperCDP schedule ID.

To obtain the value, run "show hyper_cdp_schedule general".


ID list of the LUN consistency groups to be added.

  • To obtain the value, run "show lun_consistency_group general".
  • You can specify multiple LUN consistency group IDs separated by commas (,) or an ID range using hyphens (-), such as: 1,5-8.



Usage Guidelines

After you add LUN consistency groups to a HyperCDP schedule, the schedule will be effective for the added LUN consistency groups.


Add LUN consistency groups "1", "5", and "6" to HyperCDP schedule "1".

admin:/> add hyper_cdp_schedule lun_consistency_group schedule_id=1 lun_consistency_group_id_list=1,5-6 
Add HyperCDP schedule lun_consistency_group  1 successfully. 
Add HyperCDP schedule lun_consistency_group  5 successfully. 
Add HyperCDP schedule lun_consistency_group  6 successfully.

System Response


Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 120918

Downloads: 149

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next