No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
remove notification receiver

remove notification receiver

Function

The remove notification receiver command is used to remove email addresses or phone numbers used to receive alarm or event notifications.

Format

remove notification receiver [ alarm_level=? ] { email_receiver_list=? | message_receiver_list=? | event_email_receiver_list=? | event_message_receiver_list=? } *

Parameters

Parameter

Description

Value

alarm_level=?

Alarm severity.

The value can be "warning", "major" or "critical". You can run the "show notification email_extend" or "show notification sms" command to check the severity.

email_receiver_list=?

List of emails that receive alarms.

Multiple email addresses can be specified. You can run the "show notification email_extend" command to check the email list.

message_receiver_list=?

List of phone numbers that receive alarm notifications.

Multiple phone numbers can be specified. Separate the phone numbers by commas (,).

* specify all phone numbers to receive the notification will be removed.

Each phone number must be 3 to 31 characters in length.

You can run the "show notification sms" command to check the phone number list.

event_email_receiver_list=?

Email address list for receiving the event IDs with email notification enabled.

Multiple email addresses can be specified, which are separated by command (,).

To obtain the value, run "show notification email_extend".

event_message_receiver_list

Phone number list for receiving the event IDs with short message notification enabled.

Multiple phone numbers can be specified. Separate the phone numbers by commas (,). * specify all phone numbers to receive the notification will be removed. Each phone number must be 3 to 31 characters in length. You can run the "show notification sms" command to check the phone number list.

Level

Administrator

Usage Guidelines

None.

Example

  • Remove "joe@company.com" that receives warning alarms or alarms of higher severities from the recipient emails of alarm notifications.
    admin:/>remove notification receiver alarm_level=warning email_receiver_list=joe@company.com 
    WARNING: You are about to delete the recipient email or phone number of email-based or SMS-based alarm notifications. The recipient email or phone number cannot receive notifications after being deleted. 
    Suggestion: Before performing this operation, ensure that it is allowed to delete the recipient email or phone number. 
    Have you read warning message carefully?(y/n)y 
    Are you sure you really want to perform the operation?(y/n)y 
    Command executed successfully.
  • Remove 13812345678 that receives warning alarms or alarms of higher severities from the recipient phone numbers of alarm notifications.
    admin:/>remove notification receiver alarm_level=warning message_receiver_list=13812345678  
    WARNING: You are about to delete the recipient email or phone number of email-based or SMS-based alarm notifications. The recipient email or phone number cannot receive notifications after being deleted. 
    Suggestion: Before performing this operation, ensure that it is allowed to delete the recipient email or phone number. 
    Have you read warning message carefully?(y/n)y 
    Are you sure you really want to perform the operation?(y/n)y 
    Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 116398

Downloads: 134

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next