No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show iscsi target

show iscsi target

Function

The show iscsi target command is used to query information about the target connected to iSCSI links.

Format

show iscsi target [ iscsi_id=? ]

Parameters

Parameter

Description

Value

iscsi_id=?

ID of an iSCSI link.

To obtain the value, run "show iscsi target" without parameters.

Level

Guest

Usage Guidelines

  • To query information on all iSCSI targets, run show iscsi target.
  • To query information on a specific iSCSI target, run show iscsi target iscsi_id=?.

Example

Query information about the target connected to iSCSI links.

admin:/>show iscsi target 
ID Name Status Local Control ID Remote IP Port Recovery Policy CHAP Enabled Application Type 
-- --------------------------------------------------------------------- ------- ---------------- ------------ ---- --------------- ------------ ---------------- 
0 iqn.2006-08.com.huawei:oceanstor:2100f84abfe5aea2::20000:10.10.10.200 Link Up 0A 10.10.10.200 3260 Automatic No Replication

System Response

The following table describes the parameter meanings.

Parameter

Meaning

ID

ID of the target.

Name

Name of the target.

Status

Connection status of the target.

Local Control ID

Local control ID connecting with the target.

Local Port ID

Local port ID.

Remote IP

IP address of the remote target.

Port

TCP port ID of the target.

Recovery Policy

Recovery policy of the target.

CHAP Enabled

Check CHAP is enabled or not.

Application Type

Application type of this target: replication or heterogeneity.

Translation
Download
Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 122497

Downloads: 151

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next