No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show hyper_copy general

show hyper_copy general


The show hyper_copy general command is used to query HyperCopy pair information.


show hyper_copy general [ hyper_copy_id=? ] [ name=? ] [ source_lun_id=? ]






HyperCopy pair ID.

To obtain the value, run "show hyper_copy general" without parameters.


HyperCopy pair name.

The value contains 1 to 31 characters including letters, digits, hyphens (-), underscores (_), and periods (.).


Source LUN ID or source snapshot ID.

1.To obtain the value, run "show lun general".

2.To obtain the value, run "show snapshot general".



Usage Guidelines

  • Run "show hyper_copy general" to query information about all HyperCopy pairs.
  • Run "show hyper_copy general hyper_copy_id=?" to query information about a HyperCopy pair whose ID is specified.
  • Run "show hyper_copy general name=?" to query information about a HyperCopy pair whose name is specified.
  • Run "show hyper_copy general source_lun_id=?" to query information about a HyperCopy pair whose source LUN ID is specified.


  • Query information about HyperCopy pair "3".
    admin:/>show hyper_copy general hyper_copy_id=3 
      ID                      : 3                           
      Name                    : www                           
      Source ID               : 2                             
      Source Type             : LUN                           
      Target ID               : 3                             
      Health Status           : Normal                        
      Running Status          : Normal                        
      Copy Speed              : High                          
      HyperCopy Cg ID        : --                            
      Sync Start Time         : 2018-08-14/16:12:44 UTC+08:00  
      Sync End Time           : 2018-08-14/16:12:44 UTC+08:00  
      Restore Start Time      : 2018-08-14/15:27:19 UTC+08:00  
      Restore End Time        : 2018-08-14/15:27:19 UTC+08:00  
      Progress(%)             : --                            
      Estimated Copy End Time : --                            
      Description             : 
  • Query information of all HyperCopy pairs.
    admin:/>show hyper_copy general 
    ID Name  Source ID  Source Type Target ID Health Status  Running Status  Copy Speed  HyperCopy Cg ID  Sync Start Time  Sync End Time  
    ---  ----  ---------  -----------  ----------  -------------  -------------- ----------  ---------------  ---------------  ------------- 
    2 cl       0          LUN           2            Normal    Unsynchronized        Middle        --              --               --

System Response

The following table describes the parameter meanings.




HyperCopy pair ID.


HyperCopy pair name.

Source ID

ID of a HyperCopy pair source object, including a LUN or a snapshot.

Source Type

Source object type.

Target ID

ID of a HyperCopy pair target object (only LUN supported).

Running Status

Running status of a HyperCopy pair.

Health Status

Health status of a HyperCopy pair.

Copy Speed

Copy speed.

HyperCopy Cg ID

HyperCopy consistency group ID.

Sync Start Time

Synchronization start time.

Sync End Time

Synchronization end time.

Restore Start Time

Start time of reverse synchronization.

Restore End Time

End time of reverse synchronization.


Copy progress.

Estimated Copy End Time

Estimated copy end time.


HyperCopy description.

Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 121275

Downloads: 149

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next