No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
add smartqos_policy hierarchical

add smartqos_policy hierarchical


The add smartqos_policy hierarchical command is used to add normal SmartQoS policies to a specific hierarchical SmartQoS policy.


add smartqos_policy hierarchical hierarchical_smartqos_policy_id=? normal_smartqos_policy_id_list=?






ID of a hierarchical SmartQoS policy.

To obtain the value, run "show smartqos_policy general".


IDs of the normal SmartQoS policies that you want to add.

  • To obtain the value, run "show smartqos_policy general".
  • You can specify multiple SmartQoS policy IDs separated by commas (,), or ID range separated by hyphens(-), such as: 0,5-8.

A maximum of 64 SmartQoS policies can be added.



Usage Guidelines

After you add normal SmartQoS policies to a SmartQoS policy, the policy will be effective for the SmartQoS policies and the added objects.


Add SmartQoS policies "3", "4", and "5" to SmartQoS policy "0".

admin:/>add smartqos_policy hierarchical hierarchical_smartqos_policy_id=0 normal_smartqos_policy_id_list=3,4,5 
CAUTION: You are about to add SmartQoS policy into hierarchical SmartQoS policy, this operation may affect performance of objects in SmartQoS policy. 
Suggestion: Before performing this operation, ensure that the preceding risk is acceptable and the selected hierarchical SmartQoS policy and SmartQoS policy object are correct. 
Do you wish to continue?(y/n)y 
Command executed successfully.

System Response


Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 121792

Downloads: 151

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next