No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change call_home authenticate

change call_home authenticate

Function

The change call_home authenticate command is used to authenticate the Call Home service.

Format

change call_home authenticate username=? password=?

Parameters

Parameter

Description

Value

username

Support account of the technical support engineer.

The account supports the following two formats:

  • An account can start with a letter or a digit, and contains letters, digits, underscores (_), periods (.), and hyphens (-) only. The value contains 1 to 63 characters. Example: Jack_Wang.
  • The account can be an email in the following format: support@huawei.com. The value contains 1 to 100 characters.

password

Password of a support account.

A password contains 1 to 63 characters.

Level

Super administrator

Usage Guidelines

This command requires the support account and password to authenticate the Call Home service.

Example

Authenticate the Call Home service.

admin:/>change call_home authenticate username=x12345678 Password=********** 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 116294

Downloads: 134

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next