No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete hyper_cdp_consistency_group

delete hyper_cdp_consistency_group


The delete hyper_cdp_consistency_group command is used to delete HyperCDP consistency groups.


delete hyper_cdp_consistency_group cdp_consistency_group_id_list=? [ lun_consistency_group_id=? ]






ID of a HyperCDP consistency group.

  • The value is an integer ranging from 0 to 99999.
  • To obtain the value, run "show hyper_cdp_consistency_group general".
  • Multiple HyperCDP consistency groups are separated by commas(,), or the ID range is separated by hyphens (-), such as: 0,5-8.


ID of a source LUN consistency group.

  • The value is an integer ranging from 1 to 4096.
  • To obtain the value, run the "show lun_consistency_group general" command.



Usage Guidelines

  • Multiple HyperCDP consistency groups can be deleted at the same time.
  • Before running this command, ensure that the selected HyperCDP consistency group is exactly the one you want to delete and is no longer needed.


Delete HyperCDP consistency group "1".

admin:/>delete hyper_cdp_consistency_group cdp_consistency_group_id_list=1 
WARNING: You are about to delete HyperCDP consistency group, which is an irreversible operation. If you delete a HyperCDP consistency group, all HyperCDP objects and their data in the HyperCDP consistency group will be deleted. 
Suggestion: Before performing this operation, ensure that the selected HyperCDP consistency group is correct and you do not need the data of the HyperCDP object. 
Have you read warning message carefully?(y/n)y 

Are you sure you really want to perform the operation?(y/n)y 
delete HyperCDP consistency group 1 successfully.

System Response


Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 122012

Downloads: 151

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next