No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show hyper_copy_consistency_group hyper_copy

show hyper_copy_consistency_group hyper_copy

Function

The show hyper_copy_consistency_group hyper_copy command is used to query information about members in a HyperCopy consistency group.

Format

show hyper_copy_consistency_group hyper_copy hyper_copy_consistency_group_id=?

Parameters

Parameter

Description

Value

hyper_copy_consistency_group_id

HyperCopy consistency group ID.

To obtain the value, run "show hyper_copy_consistency_group general".

Level

Administrator

Usage Guidelines

None

Example

Query information about members in HyperCopy consistency group "1".

admin:/>show hyper_copy_consistency_group hyper_copy hyper_copy_consistency_group_id=1 
 ID Name  Source ID  Source Type Target ID  Health Status  Running Status  Copy Speed  HyperCopy Cg ID  Sync Start Time  Sync End Time  
 ---  ----  ---------  ----------- ---------  -------------  -------------- ----------  ----------------  ---------------  ------------- 
  2 cl       0          LUN           2         Normal      Unsynchronized        Middle        1            --               -- 
  4 cl1      1          LUN           4         Normal      Unsynchronized        Middle        1              --               --

System Response

The following table describes the parameter meanings.

Parameter

Meaning

ID

HyperCopy pair ID.

Name

HyperCopy pair name.

Source ID

ID of a HyperCopy pair source object, including a LUN or a snapshot.

Source Type

Source object type.

Target ID

ID of a HyperCopy pair target object (only LUN supported).

Health Status

Health status of a HyperCopy pair.

Running Status

Running status of a HyperCopy pair.

Copy Speed

Copy speed.

HyperCopy Cg ID

HyperCopy consistency group ID.

Sync Start Time

Synchronization start time.

Sync End Time

Synchronization end time.

Translation
Download
Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 122902

Downloads: 155

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next