No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
remove bond_port ipv6_address

remove bond_port ipv6_address


The remove bond_port ipv6_address command is used to delete the IPv6 address of the bond port.


remove bond_port ipv6_address bond_port_name=?






Bond port name.

To obtain the value, run the "show bond_port" command.



Usage Guidelines

Deleting the IP address of the host bond port causes the storage system to be inaccessible to the application server connected to the port.


Delete the IPv6 address of host bond port "bond_1_1". The bond port name and command output vary depending on products. The name and output here are just examples.

admin:/>remove bond_port ipv6_address bond_port_name=bond_1_1 
DANGER: You are about to clear IP addresses on port. This operation will disconnect the storage system from hosts. 
Suggestion: Check whether there are redundant connections to hosts. If there are no redundant connections, stop host services. 
Have you read danger alert message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response


Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 122444

Downloads: 151

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next