No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change snapshot_schedule enabled

change snapshot_schedule enabled

Function

The change snapshot_schedule enabled command is used to enable or disable a timing snapshot schedule.

Format

change snapshot_schedule enabled schedule_id_list=? enabled=?

Parameters

Parameter

Description

Value

schedule_id_list=?

ID list of timing snapshot schedules.

  • To obtain the value, run "show snapshot_schedule general".
  • You can enable or disable multiple timing snapshot schedule IDs separated by commas (,) or an ID range using hyphens (-), such as: 1,5-8.

enabled=?

Whether to enable or disable a timing snapshot schedule.

The value can be:

  • "yes": enables a timing snapshot schedule.
  • "no": disables a timing snapshot schedule.

Level

Administrator

Usage Guidelines

Before performing the operation, confirm that the schedule ID is correct and exits.

Example

  • Enable snapshot schedule "3".
    admin:/>change snapshot_schedule enabled schedule_id_list=3 enabled=yes 
    Change snapshot_schedule enabled 3 successfully.
  • Disable snapshot schedule "1".
    admin:/>change snapshot_schedule enabled schedule_id_list=1 enabled=no 
    Warning: You are about to stop the timing snapshot schedule. 
    This operation will stop generating snapshots based on the policy. 
    Suggestion: Before performing this operation, ensure that timing snapshots do not need to be generated. 
    Have you read warning message carefully?(y/n)y 
      
    Are you sure you really want to perform the operation?(y/n)y 
    Change snapshot_schedule disabled 1 successfully.

System Response

None

Translation
Download
Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 115058

Downloads: 134

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next