No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
add role permit

add role permit

Function

The add role permit command is used to add permissions to roles.

Format

add role permit id=? permit_list=?

Parameters

Parameter

Description

Value

id=?

Role ID. The value must be an integer from 1 to 1023.

To obtain the value, run the "show role system" command.

permit_list=?

List of added permissions.

The value contains a maximum of 2048 characters. The value is in the format of "Directory1:Object1,Object2;Directory2:Object2,Object3;Directory3:all", where Directory1, Directory2, and Directory3 indicate directories for which the role will have permission. Object1, Object2, Object3, and all indicate objects in the directory. Object1, Object2, and Object3 indicate single object, and all indicates all the objects that can be configured by the group where the role belong in the permission directory.

Level

Super administrator

Usage Guidelines

None.

Example

Add permission "lun:lun" to the role whose ID is "65".

admin:/>add role permit id=65 permit_list=lun:lun 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 115490

Downloads: 134

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next