No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
create quorum_server general

create quorum_server general

Function

The create quorum_server general command is used to create a third-place quorum server.

Format

create quorum_server general active_ip=? server_name=? [ active_server_port=? | description=? ] *

Parameters

Parameter

Description

Value

active_ip=?

Active IP address of the quorum server.

The value can be an IPv4 or IPv6 address and cannot be a loopback address, unspecified address, or multicast address.

server_name=?

Local server name.

The value contains 1 to 31 ASCII characters including digits, letters, underscores (_), hyphens (-), and periods (.), and must start with a letter or number.

active_server_port=?

Server communication port ID.

The value is an integer ranging from 1 to 65535. If this parameter is not specified, the system uses the default port 30002.

description=?

Local description of a server.

The value consists of 1 to 127 characters, including digits, letters, underscores (_), hyphens (-), and periods (.).

Level

Administrator

Usage Guidelines

None

Example

Create a third-place quorum server whose IP address is "10.100.2.210" and server name is "cps0".

admin:/>create quorum_server general active_ip=10.100.2.210 server_name=cps0 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 115438

Downloads: 134

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next