No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change snapshot_consistency_group cancel_restore

change snapshot_consistency_group cancel_restore


The change snapshot_consistency_group cancel_restore command is used to cancel rollback from a snapshot consistency group.


change snapshot_consistency_group cancel_restore snapshot_consistency_group_id=?






ID of a snapshot consistency group.

The value is an integer ranging from 1 to 4096.



Usage Guidelines



Cancel rollback from snapshot consistency group "1".

admin:/>change snapshot_consistency_group cancel_restore snapshot_consistency_group_id=1 
DANGER: You are about to stop rolling back the snapshot data in the snapshot consistency group to the LUN in the LUN consistency group. This operation will cause the LUN data in the LUN consistency group to be unavailable.  
Suggestion: Before performing this operation, ensure that the LUN data in the LUN consistency group is not required. 
Have you read danger alert message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response


Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 121388

Downloads: 149

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next