No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change remote_device general

change remote_device general

Function

The change remote_device general command is used to rename remote devices. The remote devices must be heterogeneous storage devices.

Format

change remote_device general remote_device_id=? [ name=? ] [ compress_algorithm=? ] [ compress_judge=? ]

Parameters

Parameter

Description

Value

remote_device_id=?

ID of a remote device.

To obtain the value, run "show remote_device general".

name=?

An updated name of a remote device.

The value contains 1 to 31 characters including letters, digits, hyphens (-), underscores (_), and periods (.).

compress_algorithm=?

Compress level to be set.

The value could be:

  • fast:The best compress performance.
  • deep:The best compress efficency.

The default value is fast.

compress_judge=?

Whether to enable smart compress.

The value could be:

  • Yes:enable.
  • No:disable.

The default value is Yes.

Level

Administrator

Usage Guidelines

None

Example

  • To rename remote device "1" to "newname001", run the following command:
    admin:/>change remote_device general remote_device_id=1 name=newname001 
    Command executed successfully.
  • To change remote device "1" compress level to "deep" and compress judge to "yes", run the following command.
    admin:/>change remote_device general remote_device_id=1 compress_algorithm=deep compress_judge=yes 
    Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 116683

Downloads: 134

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next