No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
add lun_consistency_group lun

add lun_consistency_group lun


The add lun_consistency_group lun command is used to add a member LUN to a specified LUN consistency group. Use this command if consistency management is required for LUNs.


add lun_consistency_group lun lun_consistency_group_id=? lun_id_list=?






ID of the LUN consistency group to which a member LUN is to be added.

To obtain the value, run "show lun_consistency_group general".


ID list of LUNs to be added to a LUN consistency group.

To obtain the LUN ID list, run "show lun general". If you want to concurrently add multiple LUNs to a LUN consistency group:

  • Separate multiple LUN IDs by commas (,). For example, "lun_id_list=1,2,3,4,5".
  • Specify a LUN ID range using a hyphen (-). For example, "lun_id_list=1-5,7,9-11".



Usage Guidelines

  • A LUN can be added to only one LUN consistency group.
  • A LUN consistency group can add a maximum of 2048 member LUNs.
  • PE LUNs, heterogeneous LUNs (eDevLUNs), and VVol LUNs cannot be added to a LUN consistency group.
  • LUNs that have been added to a timing snapshot schedule cannot be added to a consistency group.
  • LUNs with a SmartMigration task created cannot be added to a consistency group.


Add LUN "2" to LUN consistency group "2".

admin:/>add lun_consistency_group lun lun_consistency_group_id=2 lun_id_list=2 
Add LUN 2 to LUN consistency group successfully.

System Response


Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 120932

Downloads: 149

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next