No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete file

delete file


The delete file command is used to delete files of a specific type from the system memory or system disk, where the files to be deleted have been exported before.


delete file filetype=? [ interlog_name=? ] [ controller_id=? ]






Type of the file.

The value can "event", "log", "running_data", "configuration_data", "all_log", "smart", "workload", "call_home", "diagnostic_file", "isolated_disklog", "running_disklog", "cloudbackup_log", or "all_cloudbackup_log", where:

  • "event": indicates event files.
  • "log": indicates recent log files.
  • "running_data": indicates system running data files.
  • "configuration_data": indicates system configuration files.
  • "all_log": indicates all logs of the system.
  • "smart": indicates disk smart information.
  • "workload": indicates workload.
  • "call_home": indicates Call Home data.
  • "diagnostic_file": diagnostic file.
  • "isolated_disklog": isolated disklog info.
  • "running_disklog": running disklog info.
  • "cloudbackup_log": indicates recent cloudbackup log info.
  • "all_cloudbackup_log": indicates all cloudbackup log info.


Controller ID.

Controller IDs are separated by commas (,). The value is in the format of "XA", "XB", "XC", and "XD", where the "X" is an integer ranging from 0 to 3, for example: "0A","1C". This parameter can be specified only when "filetype" is set to "log", "all_log", "call_home", "workload", "smart", "isolated_disklog", "running_disklog", "cloudbackup_log", or "all_cloudbackup_log".


Name of the exported running disk log.

This parameter can be specified only when "filetype" is set to "running_disklog".



Usage Guidelines



  • Delete event files from the system memory, where the files to be deleted have been exported before.
    admin:/>delete file filetype=event 
    Command executed successfully.
  • Delete the exported diagnostic file.
    admin:/>delete file filetype=diagnostic_file 
    Command executed successfully.
  • Delete exported running disklog files.
    admin:/>delete file filetype=running_disklog interlog_name=CTE1.1_210235G7JK10D7000085.tgz controller_id=1A 
    Command executed successfully.
  • Delete the exported recent cloudbackup file.
    admin:/>delete file filetype=cloudbackup_log 
    Command executed successfully.
  • Delete the exported all cloudbackup file.
    admin:/>delete file filetype=all_cloudbackup_log 
    Command executed successfully.

System Response


Updated: 2019-04-09

Document ID: EDOC1100049140

Views: 103227

Downloads: 119

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next