No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
remove remote_device link fc

remove remote_device link fc


The "remove remote_device link fc" command is used to delete a Fibre Channel link from a remote device.


remove remote_device link fc fc_link_id=?






Link ID.

To obtain the value, run "show remote_device link".



Usage Guidelines

  • After this command is executed, the selected link is deleted from the storage system.
  • Before performing this operation, ensure that the selected link needs to be deleted.


Deleting Fibre Channel link "0".

admin:/>remove remote_device link fc fc_link_id=0 
WARNING: You are going to remove links for remote devices. This operation removes all links but leaves one to bear replication services between storage arrays. If this link is faulty, all replication services between storage arrays are interrupted. 
Suggestion: Before you perform this operation, ensure that you have selected correct links, which are removable. 
Have you read warning message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response


Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 122558

Downloads: 151

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next