No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference for Block

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete dr_star general

delete dr_star general


The delete dr_star general command is used to delete DR Star.


delete dr_star general dr_star_id=? [ is_local_execute=? ]






DR Star ID.

To obtain the value, run "show dr_star general".


Whether local deletion is executed.

The value can be "no" or "yes", where:

  • "no": Local deletion is not executed.
  • "yes": Local deletion is executed.

The default value is "no".



Usage Guidelines

  • This operation will remove the DR Star relationship among the three sites and clear the DR Star configuration information from arrays. As a result, the asynchronous DR relationship does not exist when a fault occurs.
  • Before performing an all-end deletion operation, ensure that the replication links between the primary site and the other two sites are normal and the running status of DR Star is "Disable".
  • Before performing a local deletion operation, ensure that the running status of DR Star is "Disable" or "Invalid".
  • If the running status of DR Star is "Invalid", only the local deletion command is available.


Delete DR Star "1a212d4a5e6b0000".

admin:/>delete dr_star general dr_star_id=1a212d4a5e6b0001 
WARNING: You are about to delete DR Star.This operation will cancel the service relationship between the three members in the DR Star, and the operation cannot be rolled back. 
Suggestion: Before performing this operation, ensure that you have selected the correct DR Star. 
Have you read warning message carefully?(y/n)y 

Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response


Updated: 2019-07-16

Document ID: EDOC1100049140

Views: 123827

Downloads: 155

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next