No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Disk Encryption User Guide

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. This document introduces how to install and configure key management servers connected to the storage systems that use self-encrypting disks.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Using the xlight FTP Tool to Deploy the FTP Backup Server

Using the xlight FTP Tool to Deploy the FTP Backup Server

This section describes how to deploy the FTP backup server by using the xlight FTP tool. For details on how configure other FTP servers, see their respective configuration documentation.

Prerequisites

  • The FTP server software installation package is ready.
  • The IP address to be configured can properly communicate with the storage system.

Procedure

  1. Start the Xlight FTP server software.

    The Xlight FTP Server page is displayed.

  2. Configure a virtual server.

    1. On the Xlight FTP Server page, click .

      The New Virtual Server dialog box is displayed.

    2. In the New Virtual Server dialog box, set IP Address, Port, and Protocol to the local IP address, 21, and FTP, respectively.
    3. Click OK.

      The added virtual server is displayed in the Xlight FTP Server page that is displayed.

  3. Start the virtual server.

    Select the added virtual server and click to start the server.

    NOTE:

    You can also select the added virtual server, right-click, and choose Start Server to start the server.

  4. Add a user.

    1. On the Xlight FTP Server page, click .

      The user list is displayed.

    2. Click .

      The adding users dialog box is displayed.

    3. In the dialog box, enter Username and Password and set Home Directory.
    4. Click OK.

      The user is added, and user information is displayed on the user page.

  5. Set virtual directory permissions.

    1. In the user list, select the added user and click .

      The user name page is displayed.

    2. On the navigation bar on the left, click .

      The user directory management page is displayed.

    3. Select the access directory of the added user and click .

      The Virtual Directory dialog box is displayed.

    4. In the Permission area, set permissions.
    5. Click OK.

      Virtual directory permissions are configured.

Translation
Download
Updated: 2019-07-17

Document ID: EDOC1100049141

Views: 8798

Downloads: 57

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next