No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Performance Monitoring Guide

OceanStor Dorado V3 Series V300R002

This document describes performance monitoring of storage systems, including the monitoring method, indicator planning, configuration monitoring, and problem diagnosis.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Viewing Real-Time Monitoring Data

Viewing Real-Time Monitoring Data

SystemReporter collects performance data of a device in real time to monitor its operating status. The Monitoring function allows you to view the real-time performance data or the latest hour of activity for objects such as controllers, front-end ports, and back-end ports of a storage system.


Before viewing monitoring data, ensure that Collection Switch is enabled. If Collection Switch is disabled, choose System > System Configuration > Registration and Configuration and enable it.

This document describes how to view real-time monitoring data of controllers. This process is similar for other objects. For further details on this, see the corresponding SystemReporter user guide.


  1. Go to the controller monitoring page.

    1. On the top navigation bar of the SystemReporter user interface, click Monitoring.
    2. In the left navigation tree, choose Controller for the corresponding device model.
    3. In the right pane, click Real Time.

      The real-time monitoring page is displayed.

  2. Optional: Select an indicator template.

    You can click Details after the Indicator Template drop-down list to view the indicators included in the current object type in the indicator template.

    • If an indicator template is selected in a resource type, SystemReporter only displays the indicators that support the resource type in the indicator template.
    • If a resource type does not support any indicator in an indicator template, SystemReporter will not display that indicator template.

  3. Set display rules.

    1. Click after Display Rules.

      The Customize Display Items dialog box is displayed.

    2. Select desired controllers in the Available area and click .
    3. Click OK.

  4. In the right pane, see the views of the monitored items.

Follow-up Procedure

In the right pane, you can also perform the operations described in Table 3-6.

Table 3-6 Related operations





Displays or hides the line graph of the current indicator or object.

Click the indicator or object name below the x-coordinate of the monitoring view.


Exports real-time performance monitoring data.


Data can be exported in the formats of PDF, HTML, XLS, and CSV.

Click Export.

Two-column Display

Displays the performance data in two columns.

Click .

Single-column Display

Displays the performance data in one column.

Click .

Updated: 2019-07-17

Document ID: EDOC1100049152

Views: 12446

Downloads: 85

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next