No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

SmartMigration Feature Guide

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. This document describes the implementation principles and application scenarios of the SmartMigration feature. Also, it explains how to configure and manage SmartMigration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Viewing SmartMigration Information (Applicable to V300R002C20 and Later)

Viewing SmartMigration Information (Applicable to V300R002C20 and Later)

This operation enables you to view basic information of the created SmartMigration.

Procedure

  1. Choose Provisioning > Resource Performance Tuning > SmartMigration.
  2. View the SmartMigration information. Table 5-2 describes related parameters.

    Table 5-2 SmartMigration parameters

    Parameter

    Description

    Setting

    Source LUN Name

    Name of the source LUN.

    [Example]

    LUN000

    Source LUN ID

    ID of the source LUN.

    [Example]

    0

    Target LUN Name

    Name of the target LUN.

    [Example]

    LUN001

    Target LUN ID

    ID of the target LUN.

    [Example]

    1

    Running Status

    Running status of the SmartMigration. Including Migrating, Migrated, Fault, Normal and Queuing.

    [Example]

    Migrated

    Current Migration Speed

    Data migration speed of the current SmartMigration task.

    [Example]

    Medium

    Start Time

    Time when SmartMigration starts.

    [Example]

    2014-01-26 14:09:30 UTC+8:00

    End Time

    Time when SmartMigration ends.

    [Example]

    2014-01-26 14:10:31 UTC+8:00

    Split Mode

    Split mode of SmartMigration. The value can be Automatically Split or Manually Split.

    • Automatically Split

      After data synchronization, the system performs splitting automatically. After that, the migration is complete.

    • Manually Split

      After data synchronization, perform splitting manually. After that, the migration is complete.

    [Example]

    Automatically Split

Translation
Download
Updated: 2019-07-17

Document ID: EDOC1100049155

Views: 9925

Downloads: 84

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next