No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage OBS 7.0 Parts Replacement 05

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Replacing a PCIe Card on a Riser Card of a TaiShan 2280 12-Slot Node or TaiShan 5280 36-Slot Node

Replacing a PCIe Card on a Riser Card of a TaiShan 2280 12-Slot Node or TaiShan 5280 36-Slot Node

Storage nodes support 2-port 10GE or 25GE PCIe cards, and 4-port GE PCIe cards.

Impact on the System

Before replacing a PCIe card on a storage node, you must power off the node. This will adversely affect the services running on the node.

Prerequisites

  • A spare PCIe card is ready.
  • The faulty PCIe card has been located.

Precautions

None

Tools and Materials

  • Flat-head screwdrivers
  • Phillips screwdrivers
  • ESD gloves
  • ESD wrist straps
  • ESD bags
  • Labels

Replacement Process

Replace a PCIe card by following the process shown in Figure 20-9.

Figure 20-9 PCIe card replacement process

Procedure

  1. Remove the storage node from its cabinet and remove the chassis cover. For details, see Basic Operations.
  2. Remove the PCIe card from the riser card.

    1. Lift the riser card tray, as shown in the following figures.
      Figure 20-10 Removing the riser card tray of a TaiShan 2280 node
      Figure 20-11 Removing the riser card tray of a TaiShan 5280 node
    2. Horizontally push the latch of the PCIe card outward to unlock it, as shown in step 1 in Figure 20-12.
      Figure 20-12 Removing the PCIe card from a riser card
    3. Rotate the PCIe card latch to open it, as shown in step 2 in Figure 20-12.
    4. Pull out the PCIe card, as shown in step 3 in Figure 20-12.

  3. Place the removed PCIe card in an ESD bag.
  4. Take the spare PCIe card out of its ESD bag.
  5. Install the PCIe card on the riser card.

    1. Insert the PCIe card into the PCIe slot, as shown in step 1 in Figure 20-13.
      Figure 20-13 Installing a PCIe card on the riser card
    2. Close the latch on the PCIe slot, as shown in step 2 in Figure 20-13.
    3. Install the riser card tray, as shown in the following figures.
      Figure 20-14 Installing the riser card tray of a TaiShan 2280 node
      Figure 20-15 Installing the riser card tray of a TaiShan 5280 node

  6. Install the chassis cover and put the storage node into the cabinet. For details, see Basic Operations.
  7. Connect the storage node to the power sockets and peripheral devices according to the cable connection labels. Ensure that all cables are correctly connected and then power on the storage node. If the storage node is not powered on, press the power button on the front panel.
  8. Check whether the PCIe card is successfully installed.

    Log in to the iBMC page on the storage node. Choose Information > System Info > Other Devices. Query the information about the corresponding part and check whether the installation is successful.
    • If information about the PCIe card is displayed on the iBMC page, the PCIe card is successfully installed.
    • If information about the PCIe card is not displayed on the iBMC page, the PCIe card fails to be installed. Reinstall it. If information about the PCIe card still cannot be obtained, contact Huawei technical support.

  9. Check the system status.

    On SmartKit, choose Home > Storage > Routine Maintenance > More > Inspection and check the system status.
    • If all inspection items pass the inspection, the inspection is successful.
    • If some inspection items fail, the inspection fails. Rectify the faults by taking recommended actions in the inspection reports. Perform inspection again after fault rectification. If the inspection still fails, contact Huawei technical support.

    For details, see the FusionStorage OBS Administrator Guide.

Follow-up Procedure

Label the replaced PCIe card to facilitate subsequent operations.

Translation
Download
Updated: 2019-07-05

Document ID: EDOC1100051325

Views: 5993

Downloads: 2

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next