No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage OBS 7.0 Parts Replacement 05

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Replacing a Battery of a TaiShan 2280 V2 12-Slot Node or TaiShan 5280 V2 36-Slot Node

Replacing a Battery of a TaiShan 2280 V2 12-Slot Node or TaiShan 5280 V2 36-Slot Node

This section describes how to replace a battery.

Impact on the System

Before replacing a battery on a storage node, you must power off the node. This will adversely affect the services running on the node.

Prerequisites

A spare battery is ready.

Precautions

None

Tools and Materials

  • Flat-head screwdrivers
  • Phillips screwdrivers
  • ESD gloves
  • ESD wrist straps
  • ESD bags
  • Labels

Replacement Process

Replace a battery by following the process shown in Figure 17-13.

Figure 17-13 Battery replacement process

Procedure

  1. Remove the storage node from its cabinet and remove the chassis cover. For details, see Basic Operations.
  2. Remove the 2 x 2.5-inch rear disk assembly.

    1. Remove all cables from the rear disk assembly.
    2. Unscrew the rear disk assembly and vertically lift it, as shown in the following figures.
      Figure 17-14 Removing the rear disk assembly of a TaiShan 2280 V2 node
      Figure 17-15 Removing the rear disk assembly of a TaiShan 5280 V2 node

  3. Remove the battery.

    Pull up the right end of the battery and remove it from the slot, as shown in the following figures.

    Figure 17-16 Removing the battery of a TaiShan 2280 V2 node
    Figure 17-17 Removing the battery of a TaiShan 5280 V2 node

  4. Place the removed battery in an ESD bag.
  5. Take the spare battery out of its ESD bag.
  6. Install the battery.

    Hold the battery with the side marked with text facing upwards, insert the left end of the battery into the slot, and gently press down the battery until it is properly installed in the slot, as shown in the following figures.

    Figure 17-18 Installing the battery of a TaiShan 2280 V2 node
    Figure 17-19 Installing the battery of a TaiShan 5280 V2 node

  7. Remove the 2 x 2.5-inch rear disk assembly.

    1. Remove all cables from the rear disk assembly.
    2. Unscrew the rear disk assembly and vertically lift it, as shown in the following figures.
      Figure 17-20 Removing the rear disk assembly of a TaiShan 2280 V2 node
      Figure 17-21 Removing the rear disk assembly of a TaiShan 5280 V2 node

  8. Install the chassis cover and put the storage node into the cabinet. For details, see Basic Operations.
  9. Connect the storage node to the power sockets and peripheral devices according to the cable connection labels. Ensure that all cables are correctly connected and then power on the storage node. If the storage node is not powered on, press the power button on the front panel.
  10. Check the system status.

    On SmartKit, choose Home > Storage > Routine Maintenance > More > Inspection and check the system status.
    • If all inspection items pass the inspection, the inspection is successful.
    • If some inspection items fail, the inspection fails. Rectify the faults by taking recommended actions in the inspection reports. Perform inspection again after fault rectification. If the inspection still fails, contact Huawei technical support.

    For details, see the FusionStorage OBS Administrator Guide.

Follow-up Procedure

Label the replaced battery to facilitate subsequent operations.

Translation
Download
Updated: 2019-07-05

Document ID: EDOC1100051325

Views: 7768

Downloads: 2

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next