No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage OBS 7.0 Administrator Guide 06

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SNMP Security Policy

SNMP Security Policy

This section describes how to configure an SNMP security policy to improve system security.

Context

Only the super administrators and administrators can configure the SNMP security policy.

Procedure

  1. Log in to DeviceManager.
  2. Choose Settings > SNMP Management > SNMP Security Policy.
  3. Configure an SNMP security policy.

    1. Set SNMP security policy parameters. Table 4-21 describes related parameters.
      Table 4-21 SNMP security policy parameters

      Parameter

      Description

      Min. Password Length

      Indicates the minimum length of a USM user password, which prevents an excessively short password from being set. The value must be an integer ranging from 4 to 32.

      Max. Password Length

      Indicates the maximum length of a USM user password, which prevents an excessively long password from being set. The value must be an integer ranging from 4 to 32.

      Password Complexity

      Indicates the password complexity, which prevents an excessively simple password from being set.

      Complexity options are as follows:

      • A password must contain special characters (!"#$%&\'()*+,-./:;<=>?@[\]^`{_|}~ and space) and at least two of the following character types: uppercase letters, lowercase letters, and digits.
      • A password must contain special characters (!"#$%&\'()*+,-./:;<=>?@[\]^`{_|}~ and space), uppercase letters, lowercase letters, and digits.
      • A password must contain one of the following character types: special characters (!"#$%&\'()*+,-./:;<=>?@[\]^`{_|}~ and space), uppercase letters, lowercase letters, and digits.

      Allow the authentication password and data encryption password to be the same

      Indicates whether to allow the authentication password and data encryption password to be identical.

      Allow the USM user name and password to be the same

      Indicates whether to allow a USM user name and its password to be identical.

      Set different read and write community strings

      Indicates whether to set different read and write community strings.

      Statistic Collection Interval of Authentication Failures

      Indicates a period within which the number of authentication failures is counted. The value ranges from 1 to 600, in units of seconds.

      Allowed Consecutive Authorization Failures

      Indicates the number of consecutive authentication failures. The value ranges from 3 to 100. An IP address will be locked as soon as the value is exceeded.

      IP Address Lockout Time (s)

      Indicates the duration for which an IP address remains locked. The value ranges from 10 to 3600, in units of seconds.

    2. Click Save.

Translation
Download
Updated: 2019-07-17

Document ID: EDOC1100051329

Views: 8233

Downloads: 22

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next