No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionStorage OBS 7.0 Administrator Guide 06

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Powering Off the Cluster in DeviceManager

Powering Off the Cluster in DeviceManager

In DeviceManager, you can power off all nodes in a cluster.


Only the super administrators and administrators can power off the cluster.


Services in the storage system have been stopped.


  1. Log in to DeviceManager.
  2. Click in the upper right corner and choose Power Off Cluster.
  3. Carefully read information in the Danger dialog box and select I have read and understand the consequences associated with performing this operation.

    If you select Power off the management nodes when the service nodes fail to be powered off in the Danger dialog box that is displayed, the management nodes will be powered off even if the service nodes fail to be powered off. If you do not select this option, the management nodes will not be powered off in the scenario where the service nodes fail to be powered off.

  4. Click OK to power off the cluster.

Follow-up Procedure

You can press the power button on a storage node or remotely power on the node on the iBMC management page.

Updated: 2019-07-17

Document ID: EDOC1100051329

Views: 7785

Downloads: 22

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next