No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionStorage OBS 7.0 Administrator Guide 06

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Importing and Activating a Certificate

Importing and Activating a Certificate

When a storage system is communicating with an external device, you are advised to use the certificate verification mode to improve service security. You are advised to replace the default security certificate with a certificate applied from an official authority and replace the certificate that is about to expire in a timely manner. This section describes how to import and activate a certificate.


Only super administrators and security administrators can import and activate certificates.


  1. Log in to DeviceManager.
  2. Choose Settings > Certificate Management.
  3. Select the desired certificate, click on the right, and select Import and Activate.
  4. The Import and Activate dialog box is displayed.
  5. Set Certificate File, CA Certificate File, and Private Key File as required.
  6. Click OK.
Updated: 2019-07-17

Document ID: EDOC1100051329

Views: 7793

Downloads: 22

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next