No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage OBS 7.0 Administrator Guide 06

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Changing a Control Cluster Name

Changing a Control Cluster Name

To facilitate cluster management, you can change the cluster name.

Prerequisites

The cluster initialization process has been completed.

Context

Only the super administrators and administrators can modify the control cluster name. The system viewer can view the control cluster name.

Procedure

  1. Log in to DeviceManager.
  2. Choose Cluster > Control Cluster.

    The Control Cluster page is displayed.

  3. Click on the right of the control cluster name. The modification page is displayed, as shown in Figure 4-7.

    Figure 4-7 Changing a control cluster name
    NOTE:
    • The control cluster name cannot be blank.
    • The name can contain only letters, digits, underscores (_), and hyphens (-).
    • The name can contain 1 to 64 characters.

  4. Enter the name of the cluster to be changed and click .
Translation
Download
Updated: 2019-07-17

Document ID: EDOC1100051329

Views: 7710

Downloads: 22

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next