Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Powering On or Powering Off a Storage Device
This section describes how to power on or power off a cluster and a storage node.
- Powering Off the Cluster in DeviceManager
In DeviceManager, you can power off all nodes in a cluster. - Restarting the Cluster in DeviceManager
In DeviceManager, you can power off all nodes in the cluster. - Powering Off a Storage Node in DeviceManager
In DeviceManager, you can power off a single storage node. - Restarting a Storage Node in DeviceManager
In DeviceManager, you can restart a single storage node. - Remotely Powering On or Off a Storage Node On the iBMC Management Page
Perform operations on the iBMC management page to power on or off a single storage node. - Powering On or Off a Storage Node by Pressing the Power Button
You can press the power button on the device to power on or off the storage node.
Previous
