No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage OBS 7.0 Administrator Guide 06

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logging In to the Linux Operating System of a Storage Node Using PuTTY

Logging In to the Linux Operating System of a Storage Node Using PuTTY

You can use PuTTY to remotely access the Linux operating system of a storage node through a LAN.

Prerequisites

  • The management terminal communicates with the management network port of the storage node properly.
  • PuTTY has been installed on the management terminal.
    NOTE:
    • PuTTY is a piece of Windows-based client software used for remote configuration and management. Visit the chiark website and download PuTTY from the home page.
    • You are advised to use PuTTY of the latest version to ensure a successful login.
    • This document uses PuTTY0.70 as an example.

Procedure

  1. Run PuTTY on the management terminal.

    The PuTTY Configuration dialog box is displayed, as shown in Figure A-2.

    Figure A-2 PuTTY Configuration

  2. Enter a node management IP address in Host Name (or IP address). Keep the default values for other parameters.

    NOTE:

    Use a node management IP address based on the network plan.

  3. Click Open.

    The PuTTY window is displayed, and the login as: message is prompted, asking you to enter a user name.

  4. In login as:, enter a user name and press Enter. Then enter the password and press Enter.

    The default user name is dfvmanager and its default password is Huawei@storage.

  5. Optional: Run the su - root command to switch to user root.

    The default user name is root and its default password is Huawei@storage.

    For security purposes, after the software installation, you are advised to change the default password at your first login and periodically change the password.

Translation
Download
Updated: 2019-07-17

Document ID: EDOC1100051329

Views: 9382

Downloads: 23

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next