No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage OBS 7.0 Administrator Guide 06

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking Device Health

Checking Device Health

SmartKit can be used to inspect devices to detect and resolve problems in a timely manner.

Prerequisites

Procedure

  1. On the Home page of SmartKit, choose Routine Maintenance > Health Check.

    The Health Check page is displayed, as shown in Figure 3-3.

    Figure 3-3 Health Check

  2. On the Health Check page, perform Device Selection > Inspection > Information Collection > Disk Health Analysis steps in sequence to complete the inspection.

    If you have any questions, click in the upper left corner and perform related operations as prompted.

  3. Click View Report to query information about Inspection, Information Collection, and Disk Health Analysis.
Translation
Download
Updated: 2019-07-17

Document ID: EDOC1100051329

Views: 9229

Downloads: 22

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next