No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage OBS 7.0 Planning Guide 06

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Hardware Configuration Rules

Hardware Configuration Rules

This section describes the position planning and installation rules for components such as storage nodes and switches in the cabinet during installation and deployment of FusionStorage OBS.

Assume that 40 storage nodes are deployed. The typical system configuration is as follows.

Figure 2-1 shows the typical system configuration of 2288H V5 12-slot nodes.

Figure 2-1 Typical system configuration of 2288H V5 12-slot nodes

Figure 2-2 shows the typical system configuration of 5288 V5 36-slot nodes.

Figure 2-2 Typical system configuration of 5288 V5 36-slot nodes

Figure 2-3 shows the typical system configuration of TaiShan 2280 12-slot nodes/TaiShan 2280 V2 12-slot nodes.

Figure 2-3 Typical system configuration of TaiShan 2280 12-slot nodes/TaiShan 2280 V2 12-slot nodes

Figure 2-4 shows the typical system configuration of TaiShan 5280 36-slot nodes/TaiShan 5280 V2 36-slot nodes.

Figure 2-4 Typical system configuration of TaiShan 5280 36-slot nodes/TaiShan 5280 V2 36-slot nodes
Translation
Download
Updated: 2019-07-17

Document ID: EDOC1100051332

Views: 3230

Downloads: 23

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next