No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionStorage OBS 7.0 Hardware Installation Guide 07

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing Holding Rails for a Storage Node

Installing Holding Rails for a Storage Node

After determining where to install a storage node in the cabinet, install holding rails for bearing the storage node.


  • The cabinet has been installed.
  • All required tools and materials have been ready, including:
    • Phillips screwdrivers (M3 to M6)
    • Markers
    • M6 screws


Holding rails apply to a rack with a distance of 610 mm to 914 mm between the front and rear mounting bars.


  1. Hold down the plate on the front end of the holding rail, and pull out the hook. See steps 1 and 2 in Figure 8-3.

    Figure 8-3 Installing holding rails

  2. Insert the positioning pins on the rear end of the holding rail into the square holes in the rack. See step 3 in Figure 8-3.
  3. Align the front end of the holding rail with the hole in the column, and push the holding rail forward to insert it into the hole in the column. See step 4 in Figure 8-3.
  4. Push the hook backwards to make the metal sheet close to the column. See step 5 in Figure 8-3.
  5. Optional: Install an M6 screw in the third square hole on the rear end of the holding rail to secure the rail. See step 6 in Figure 8-3.
Updated: 2020-01-03

Document ID: EDOC1100051333

Views: 22708

Downloads: 28

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next