No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage OBS 7.0 Hardware Installation Guide 06

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing a KVM

Installing a KVM

A KVM provides eight VGA ports to connect to the devices in the cabinet to check the status of devices and facilitate the access to and management of network elements. You are advised to install the KVM in a position close to 22 U in a cabinet for easy maintenance.

Prerequisites

Ensure that the following conditions are met before installing the KVM:

  • The KVM is 1 U high. The installation position of the KVM must be planned according to configuration documents.
  • Guide rails have been installed.
  • All required tools have been prepared, containing Phillips screwdrivers, M4 screws, and M6 screws.

Procedure

  1. Optional: Install the KVM balancing poles by using M4 screws.
  2. Gently place the KVM on the guide rails of the cabinet and slide the KVM into the cabinet.
  3. Use M6 screws to secure the mounting ears on both sides of the KVM to the front mounting bars of the cabinet, as shown in Figure 8-58.

    NOTE:
    • Secure the two screws in the upper and lower parts of a mounting ear if L-shaped guide rails are used.
    • Secure the screw in the upper part of a mounting ear if L-shaped adjustable guide rails are used.

    The following figure takes the L-shaped guide rails as an example.

    Figure 8-58 Installing the KVM

  4. Verify that the KVM switch is horizontally installed and firmly secured.
Translation
Download
Updated: 2019-07-17

Document ID: EDOC1100051333

Views: 18664

Downloads: 25

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next