No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage OBS 7.0 Hardware Installation Guide 06

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Obtaining Tools and Meters

Obtaining Tools and Meters

Before installing devices, ensure that all required installation tools and meters are ready.

Table 3-2 and Table 3-3 list the tools and meters required for the installation.

NOTE:
  • The tools and meters described in this section are examples only. The actual tools and meters may be different.
  • The meters must be calibrated and proved qualified before use.
Table 3-2 Required tools

No.

Name

Tool

Usage

1

Marker

Used to make marks

2

Phillips screwdriver (M3 to M6)

Used to fasten small screws and bolts, instead of nuts. The Phillips screwdriver has a cross-shaped head and provides a small moment of fastening force.

3

Flat-head screwdriver

Used to fasten small screws and bolts, instead of nuts. The flat-head screwdriver has a line-shaped head and provides a small moment of fastening force.

4

Diagonal pliers

Used to cut insulation tubes and cable ties

5

Crimping tool

Used to crimp network cables

6

Utility knife

Used to cut paper

7

Floating mounting bar

Used to install or remove floating nuts

8

ESD clothes

Used to prevent the electrostatic discharge (ESD) from damaging a board or other electrostatic sensitive devices (ESSDs)

9

ESD gloves

Used to prevent ESD from damaging a board or other ESSDs

10

ESD wrist strap

Used to prevent ESD when you touch or operate a device or component

Table 3-3 Required meters

No.

Name

Meter

Usage

1

Multimeter

Used to measure the insulation of a cabinet, connection of a cable, and electric performance specifications of a device, such as voltage, current, and resistance

2

Network cable tester

Used to test whether a network cable is connected and check the connection sequence in a network cable

Translation
Download
Updated: 2019-07-17

Document ID: EDOC1100051333

Views: 16832

Downloads: 22

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next