Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Removing Filler Panels from the Cabinet
If filler panels are installed on the planned device installation positions of the cabinet, remove the filler panels before installing the devices.
Prerequisites
Filler panels have been located in the cabinet.
Procedure
- Determine the filler panels to be removed according to the device installation positions in the cabinet.
- Hold the snap-in connectors at both sides of a filler panel to be removed, press the snap-in connectors, and pull out the filler panel with proper force, as shown in Figure 8-1.
Previous
