No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor UltraPath for vSphere 21.3.0 User Guide 03

This document covers the functions, features, installation, configuration, upgrade, uninstallation, maintenance, troubleshooting, and FAQs of OceanStor UltraPath for vSphere (UltraPath forvSphere). UltraPath for vSphere is the multipathing software developed by HuaweiTechnologies Co., Ltd (Huawei for short). The document aims at helping users to be fully familiar with UltraPath for vSphere and its use.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Status Check

Status Check

Status check mainly refers to the check of UltraPath for ESXi's running status. Status check can provide clues for fault troubleshooting.

Viewing Running Status

This section describes how to view the running status of UltraPath for ESXi and rectification suggestions.

Procedure
  1. In the Monitoring and Inspection area on the left of the vCenter management interface, click Status Check.
  2. In the upper right part of the function pane, select a severity from Severity.
  3. Select a disk array from Disk array.
  4. In the Status Check Details area, view the detailed status information and suggestions.

    NOTE:

    In the upper right part of the function pane, click Refresh to refresh critical status information about UltraPath for ESXi during its running.

Exporting Status Information

This section describes how to export the status information about UltraPath for ESXi to a local disk.

Prerequisites

For vCenter 6.0, this document takes the IE browser to access the vCenter server as an example.

Procedure
  1. In the Monitoring and Inspection area on the left of the vCenter management interface, click Status Check.
  2. In the upper right part of the function pane, click Export All.

    The File Download dialog box is displayed.

  3. Click Save.

    The Save as dialog box is displayed.

  4. Select a path for saving the information.
  5. Enter a file name in the File name text box.

    The file name contains not more than 200 characters (excluding the file name extension).

  6. Click Save.
Translation
Download
Updated: 2019-06-29

Document ID: EDOC1100052672

Views: 14660

Downloads: 147

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next