No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor UltraPath for vSphere 21.3.0 User Guide 03

This document covers the functions, features, installation, configuration, upgrade, uninstallation, maintenance, troubleshooting, and FAQs of OceanStor UltraPath for vSphere (UltraPath forvSphere). UltraPath for vSphere is the multipathing software developed by HuaweiTechnologies Co., Ltd (Huawei for short). The document aims at helping users to be fully familiar with UltraPath for vSphere and its use.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting Failback Delay

Setting Failback Delay

Function

The set failbackdelaytime command is used to set failback delay.

Format

set failbackdelaytime -t time

Parameters

Keyword and Parameter

Description

Default Value

-t time

Failback delay.

The value ranges from 0 to 3600, expressed in seconds.

60

Level

User root

Usage Guidelines

NOTE:

To prevent intermittent communication interruption between links and service instability, UltraPath for ESXi does not immediately implement failback upon detecting the recovery of a faulty path. Instead, UltraPath for ESXi continues to monitor the path and implements failback if the path remains normal to improve system reliability. The failback delay may cause slight performance drop, but it is for the balance between reliability and performance.

Example

Set failback delay to 600 seconds.

~ # esxcli upadm set failbackdelaytime -t 600 
Succeeded in executing the command.

System Response

None

Translation
Download
Updated: 2019-06-29

Document ID: EDOC1100052672

Views: 14694

Downloads: 147

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next