No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor UltraPath for vSphere 21.3.0 User Guide 03

This document covers the functions, features, installation, configuration, upgrade, uninstallation, maintenance, troubleshooting, and FAQs of OceanStor UltraPath for vSphere (UltraPath forvSphere). UltraPath for vSphere is the multipathing software developed by HuaweiTechnologies Co., Ltd (Huawei for short). The document aims at helping users to be fully familiar with UltraPath for vSphere and its use.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the Pending Delete Period of Obsolete Path Information

Setting the Pending Delete Period of Obsolete Path Information

Function

The set obsoletepathcleardelaytime command is used to set the pending delete period of information about obsolete paths.

Format

  • set obsoletepathcleardelaytime -t time
  • set obsoletepathcleardelaytime --time time

Parameters

Parameter

Description

Default Value

time

  • The pending delete period of information about obsolete paths.
  • The value ranges from 7,200 to 2,592,000, expressed in seconds.

28,800

Level

User root

Usage Guidelines

NOTE:
  • When the network is faulty (for example, the optical fiber link is interrupted), some paths managed by UltraPath will be set to faulty state automatically. If the storage system administrator has not adjusted the pending delete period, the system will delete information about the paths in faulty state automatically eight hours later.
  • If the storage system administrator wants to reserve the path information for fault analysis or clear the path information earlier to reduce interference, the administrator can use this command to adjust the pending delete period.

Example

Setting the pending delete period of obsolete path information to 7200s.

[root@localhost:~] esxcli upadm set obsoletepathcleardelaytime -t 7200 
Succeeded in executing the command.
[root@localhost:~] esxcli upadm set obsoletepathcleardelaytime --time 7200 
Succeeded in executing the command.

System Response

None

Translation
Download
Updated: 2019-06-29

Document ID: EDOC1100052672

Views: 14674

Downloads: 147

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next