No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor UltraPath for vSphere 21.3.0 User Guide 03

This document covers the functions, features, installation, configuration, upgrade, uninstallation, maintenance, troubleshooting, and FAQs of OceanStor UltraPath for vSphere (UltraPath forvSphere). UltraPath for vSphere is the multipathing software developed by HuaweiTechnologies Co., Ltd (Huawei for short). The document aims at helping users to be fully familiar with UltraPath for vSphere and its use.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Uninstalling UltraPath for ESXi

Uninstalling UltraPath for ESXi

This section describes the procedure for uninstalling UltraPath for ESXi.

Uninstalling UltraPath for ESXi on the ESXCLI

This section describes how to uninstall UltraPath for ESXi on the ESXCLI.

Prerequisites

Services running on the ESXi host have stopped.

Procedure
  1. Log in to the ESXi host.
  2. Run esxcli software vib remove -n ultrapath.cli to uninstall ultrapath.cli.

    ~ # esxcli software vib remove -n ultrapath.cli 
    Removal Result 
     Message: The update completed successfully, but the system needs to be rebooted for the changes to be effective. 
     Reboot Required: true 
     VIBs Installed: 
     VIBs Removed: HUAWEI_bootbank_ultrapath.cli_XX.XX.XXX-00 
     VIBs Skipped:

  3. Run esxcli software vib remove -n ultrapath.cim to uninstall ultrapath.cim.

    ~ # esxcli software vib remove -n ultrapath.cim 
    Removal Result 
     Message: The update completed successfully, but the system needs to be rebooted for the changes to be effective. 
     Reboot Required: true 
     VIBs Installed:  
     VIBs Removed: HUAWEI_bootbank_ultrapath.cim_XX.XX.XXX-00 
     VIBs Skipped: 

  4. Run esxcli software vib remove -n ultrapath.mpp to uninstall ultrapath.mpp.

    ~ # esxcli software vib remove -n ultrapath.mpp 
    Removal Result 
     Message: The update completed successfully, but the system needs to be rebooted for the changes to be effective. 
     Reboot Required: true 
     VIBs Installed:  
     VIBs Removed: HUAWEI_bootbank_ultrapath.mpp_XX.XX.XXX-00 
     VIBs Skipped:

  5. Restart the ESXi host.

Uninstalling UltraPath for ESXi on the vSphere CLI

This section describes how to uninstall UltraPath for ESXi on the vSphere CLI.

Prerequisites

Services running on the ESXi host have stopped.

Procedure
  1. Log in to the application server (running Windows or Linux) where VMware vSphere CLI has been installed. The application server running Windows is used as an example.
  2. Run the following command to uninstall ultrapath.cli.

    C:\Program Files (x86)\VMware\VMware vSphere CLI\bin>esxcli --server 10.158.196.104 
    --username root --password xxxxxx software vib remove -n ultrapath.cli 
    Removal Result 
     Message: The update completed successfully, but the system needs to be rebooted for the changes to be effective. 
     Reboot Required: true 
     VIBs Installed: 
     VIBs Removed: HUAWEI_bootbank_ultrapath.cli_XX.XX.XXX-00 
     VIBs Skipped:
    NOTE:

    If you cannot log in to the ESXi host using VMware vSphere CLI 6.0, see VMware Official Knowledge Base to troubleshoot fault.

  3. Run the following command to uninstall ultrapath.cim.

    C:\Program Files (x86)\VMware\VMware vSphere CLI\bin>esxcli --server 10.158.196.104 
    --username root --password xxxxxx software vib remove -n ultrapath.cim 
    Removal Result 
     Message: The update completed successfully, but the system needs to be rebooted for the changes to be effective. 
     Reboot Required: true 
     VIBs Installed:  
     VIBs Removed: HUAWEI_bootbank_ultrapath.cim_XX.XX.XXX-00 
     VIBs Skipped: 

  4. Run the following command to uninstall ultrapath.mpp.

    C:\Program Files (x86)\VMware\VMware vSphere CLI\bin>esxcli --server 10.158.196.104 
    --username root --password xxxxxx software vib remove -n ultrapath.mpp 
    Removal Result 
     Message: The update completed successfully, but the system needs to be rebooted for the changes to be effective. 
     Reboot Required: true 
     VIBs Installed:  
     VIBs Removed: HUAWEI_bootbank_ultrapath.mpp_XX.XX.XXX-00 
     VIBs Skipped:

  5. Restart the ESXi host.
Translation
Download
Updated: 2019-06-29

Document ID: EDOC1100052672

Views: 14730

Downloads: 147

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next