No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor UltraPath for vSphere 21.3.0 User Guide 03

This document covers the functions, features, installation, configuration, upgrade, uninstallation, maintenance, troubleshooting, and FAQs of OceanStor UltraPath for vSphere (UltraPath forvSphere). UltraPath for vSphere is the multipathing software developed by HuaweiTechnologies Co., Ltd (Huawei for short). The document aims at helping users to be fully familiar with UltraPath for vSphere and its use.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the Remote Log on the vSphere Client

Setting the Remote Log on the vSphere Client

This section describes how to configure a remote log on the vSphere Client.

Procedure

  1. Log in to the VMvare vSphere Client.
  2. In the right navigation tree, select the host you want to configure.
  3. Click the Configuration tab.
  4. In the Software area, click Advanced Settings.

    The Advanced Settings page is displayed.

  5. On the Advanced Settings page, choose Syslog > global.
  6. In the right pane, set the remote log. Table 4-1 describes related parameters.

    Table 4-1 General parameters

    Parameter

    Description

    Value

    Syslog.global.defaultRotate

    Sets the maximum number of archives to keep.

    You can set this number globally and for individual subloggers.

    [Default value]

    8

    Syslog.global.defaultSize

    Sets the default size of the log, in KB, before the system rotates logs.

    You can set this number globally and for individual subloggers.

    [Default value]

    30,960

    Syslog.global.LogDir

    Directory where logs are saved.

    The directory can be located on mounted NFS or VMFS volumes. Only the /scratch directory on the local file system is persistent across reboots. The directory should be specified as [datastorename] path_to_file where the path is relative to the root of the volume backing the datastore. For example, the path [storage1] var/log/messages maps to the path /vmfs/volumes/storage1/var/log/messages. If no path is specified, all log files are sent to /var/log.

    [Default value]

    None

    Syslog.global.LogHost

    Remote host to which syslog messages are forwarded and port on which the remote host receives syslog messages.

    You can include the protocol and port, for example, ssl://hostName1:514. UDP (default), TCP, and SSL are supported. The remote host must have syslog installed and correctly configured to receive the forwarded syslog messages. See the documentation for the syslog service installed on the remote host for information on configuration.

    [Default value]

    None

  7. Click OK.

    If the remote log configuration requires enabling ports 514 and 1514 of the firewall outbound connection, run the following command on the esxcli:

    #esxcli network firewall ruleset set --ruleset-id=syslog --enabled=true
    
    #esxcli network firewall refresh

Translation
Download
Updated: 2019-06-29

Document ID: EDOC1100052672

Views: 14816

Downloads: 147

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next