No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor UltraPath for vSphere 21.3.0 User Guide 03

This document covers the functions, features, installation, configuration, upgrade, uninstallation, maintenance, troubleshooting, and FAQs of OceanStor UltraPath for vSphere (UltraPath forvSphere). UltraPath for vSphere is the multipathing software developed by HuaweiTechnologies Co., Ltd (Huawei for short). The document aims at helping users to be fully familiar with UltraPath for vSphere and its use.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting syslog on the vCLI

Setting syslog on the vCLI

This section describes how to set syslog.log and vmkernel.log on the vCLI.

Procedure

  1. Start the ESXi Shell client.
  2. Run esxcli system syslog config logger list to list the current log configuration information.

    # esxcli system syslog config logger list

    The syslog configuration information is as follows:

    Description: Default syslog catch-all 
    Destination: syslog.log 
    ID: syslog 
    Rotation Size: 1024 
    Rotations: 8     

    The Vmkernel configuration information is as follows:

    Description: vmkernel logs 
    Destination: vmkernel.log 
    ID: vmkernel 
    Rotation Size: 1024 
        Rotations: 8     

  3. Run esxcli system syslog config logger set --id=syslog --rotate=8 --size=30720 to set the syslog.log configuration information.
  4. Run esxcli system syslog config logger set --id=vmkernel --rotate=8 --size=30720 to set the vmkernel.log configuration information.
  5. After completing the settings, run esxcli system syslog reload for the settings to take effect.
  6. Run esxcli system syslog config logger list to list the current log configuration information.

    # esxcli system syslog config logger list

    The syslog configuration information is as follows:

    Description: Default syslog catch-all 
    Destination: syslog.log 
    ID: syslog 
    Rotation Size: 30720 
    Rotations: 8     

    The Vmkernel configuration information is as follows:

    Description: vmkernel logs 
     Destination: vmkernel.log 
     ID: vmkernel 
     Rotation Size: 30720 
     Rotations: 8     

Translation
Download
Updated: 2019-06-29

Document ID: EDOC1100052672

Views: 14649

Downloads: 145

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next